Effect of additives upon Raney-Nickel alloy catalysts

Addition of small amounts of copper to Raney Ni increases its activity for hydrogenation of crotonaldehyde and its selectivity for C=O bond hydrogenation. Higher amounts lead to higher selectivity but lower activity. The coordination chemical approach to catalysis was used to explain this result.

---

C=O. , . .

     

Semiempirical Molecular Orbital Studies of the Acylation Step in the Lipase‐Catalyzed Ester Hydrolysis

In this study, we present the results from the semiempirical molecular orbital calculations for the acylation step in the lipase‐catalyzed ester hydrolysis. The results reveal that the lowest energy path for the formation of the tetrahedral intermediate is for the serine residue of the catalytic triad to attack the substrate, followed by coupling heavy atom movement and proton transfer. The calculations of four active site models show that the cooperation of the aspartate group and the oxyanion hole is capable of lowering the activation energy by about 16 kcalmol^?1. Our results further suggest that the lipase‐catalyzed ester hydrolysis adopts the single proton transfer mechanism.     

Selective degradation of lignin and elimination of HO radicals in pulps by O<Subscript>3</Subscript> and UV laser flash irradiation

HO^. radical is an aggressive reagent to abstract hydrogen from diverse substitutes and lead them to degradation, however, in reaction of active oxygen species with lignins, complex phenolic polymers, in dispersed lignocellulose such as pulp for environment-benign delignification, HO^. radicals should be eliminated as more as possible to prevent cellulose from unfavorably concomitant degradation. A reaction system of O₃ is constructed under UV laser flash irradiation, and HO^. radicals are controlled efficiently by it. A new mechanism is proposed, for the first time, that O^. radicals generated from reaction of O₃ with UV laser flash irradiation might be the contributor to scavenge HO^. radicals.     

Synthesis and characterization of MCM-48 tubular membranes

MCM-48 membranes have been prepared on alumina supports of different pore sizes. A battery of characterization techniques has been used to study the physical properties and the quality of the membranes prepared. The highest quality membranes were prepared on supports with pore size of up to 60 nm. The MCM-48 membranes were tested in the separation of gas phase mixtures and a cyclohexane/O₂ selectivity higher than 270 was obtained. The selective separation of organic compounds from inert components is a result of the cooperative effects of capillary condensation in MCM-48 pores and of the specific interactions of the permeating compounds and the membrane material.     

Effects of various donor: acceptor blend ratios on photophysical properties in non-fullerene organic bulk heterojunctions

In this work, the donor:acceptor ratio effected photophysical properties of non-fullerene organic solar cells are comparatively investigated. Effective transportation of the photo-generated charge carriers can be obtained with the PDBD-T:ITIC ratio variation. There is no significant energy loss variation exists in the process of changing the D:A ratio.     

In situ FTIR studies on the effect of temperature on the electro-oxidation of small organic molecules at the Ru(0001) electrode

The adsorption and electro-oxidation of formaldehyde, formic acid and methanol at the Ru(0001) electrode in perchloric acid solution have been studied as a function of temperature, potential and time using in situ FTIR spectroscopy, and the results interpreted in terms of the surface chemistry of the Ru(000 1) electrode and compared to those obtained during our previous studies on the adsorption of CO under the same conditions. It was found that no dissociative adsorption or electro-oxidation of methanol takes place at Ru(0001) at potentials < 900 mV vs. Ag/AgCl, and at all three temperatures employed, 10, 25 and 50 degrees C. However, both formaldehyde and formic acid did undergo dissociative adsorption, even at -200 mV, to form linear (CO(L)) and 3-fold-hollow (COH) binding CO adsorbates. In contrast to the adsorption of CO, it was found that increasing the temperature to 50 degrees C markedly increased the amount of CO adsorbates formed on the Ru(0001) surface from the adsorption of both formaldehyde and formic acid. On increasing the potential, the electro-oxidation of the CO adsorbates to CO2 took place via reaction with the active (1 x 1)-O oxide. Formic acid was detected as a partial oxidation product during formaldehyde electro-oxidation. At all three temperatures employed, it was found that adsorbed CO species were formed from the adsorption of both formic acid and formaldehyde, and were oxidised to CO2 faster than was observed in the experiments involving CO adsorbed from CO(g), suggesting a higher mobility of the CO adsorbates formed from the adsorption of the HCOOH and HCHO. At potentials > 1000 mV, both the oxidation of formic acid to CO2 and the oxidation of formaldehyde to both CO2 and formic acid were significantly increased, and the oxidation of methanol to CO2 and methyl formate was observed, all of which were attributed to the formation of an active RuO2 phase on the Ru(0001) surface.     

Low dielectric thermoset. II. Synthesis and properties of novel 2,6‐dimethyl phenol–dipentene epoxy

A 2,6‐dimethyl phenol–dipentene adduct was synthesized from dipentene (DP) and 2,6‐dimethyl phenol, and then a 2,6‐dimethyl phenol–DP epoxy was synthesized from the reaction of the resultant 2,6‐dimethyl phenol–DP adduct and epichlorohydrin. The proposed structures were confirmed by Fourier transform infrared, elemental analysis, mass spectra, NMR spectra, and epoxy equivalent weight titration. The synthesized 2,6‐dimethyl phenol–DP adduct was cured with 4,4‐diamino diphenyl methane, phenol novolac, 4,4‐diamino diphenyl sulfone, and 4,4‐diamino diphenyl ether. The thermal properties of the cured epoxy resins were studied with differential scanning calorimetry, dynamic mechanical analysis, dielectric analysis, and thermogravimetric analysis. These data were compared with those for the bisphenol A epoxy system. The cured 2,6‐dimethyl phenol–DP epoxy exhibited a lower dielectric constant (ca. 3.1), a lower dissipation factor (ca. 0.065), a lower modulus, lower thermal stability (5% degradation temperature = 366–424 °C), and lower moisture absorption (1.21–2.18%) than the bisphenol A system but a higher glass‐transition temperature (ca. 173–222 °C) than that of bisphenol A system. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4084–4097, 2002     

Tailoring the optical property by a three-dimensional epitaxial heterostructure: a case of ZnO/SnO2

Epitaxial growth, as a best strategy to attain a heterostructure with a well-defined and clean interface, usually takes place on a planar substrate. In this paper, using a ZnO/SnO2 core-shell heterostructure as an example, we demonstrate the possibility of establishing a three-dimensional epitaxial interface between two materials with different crystal systems for the first time and show possible tailoring optical properties by building the heteroepitaxial crystal interface. The characterization results of element mapping, high-resolution transmission electron microscopy, and selected area electric diffraction reveal that the as-prepared ZnO/SnO2 heterostructure has a tetrapod-like ZnO core and a SnO2 shell with 15-30 nm, and their special epitaxial relation is (010)SnO2//(010)ZnO and [100]SnO2//[0001]ZnO. Such three-dimensional epitaxy between the ZnO core and SnO2 shell is quite different from the usual planar epitaxy or three-dimensional epitaxy between materials having the same crystal structure. A rational model of such complicated epitaxy has been proposed through investigating the certain structural comparability between the wurtzite ZnO and rutile SnO2 crystals. The as-prepared T-ZnO/SnO2 epitaxial heterostructure exhibits unique luminescence properties in contrast with individual tetrapod ZnO and SnO2 nanostructures, in which the epitaxial interface induces new luminescence properties. This result may inspire great interest in exploring other complicated epitaxy systems and their potential applications in laser, gas sensor, solar energy conversion, photo catalysis, and nanodevices in the future.     

Conjugated macrocycles related to the porphyrins. Part 2. Further synthetic and spectroscopic studies on difuryl analogs of the oxophlorins

The synthesis of three difuryl analogs of the oxophlorins is described. In common with the tetrapyrrolic oxophlorins, these compounds favor the keto tautomers and little, if any, of the enol tautomers are present in neutral solutions. Unlike the tetrapyrrolic systems, the difuryl oxophlorins give well resolved nmr spectra. Attempts to extend these studies to the synthesis of dithienyl oxophlorin analogs were unsuccessful.     

利血平的光化学荧光特性及其应用

在10％HAc介质中,利血平经紫外光照射时,其光化学反应产物具有强烈荧光(λ_(ax)=385 nm,λ_(ax)=490 nm)。利血平浓度在0.01～0.30μg/ml范围内,荧光强度与浓度呈良好的线性关系,由此建立了利血平的光化学荧光测定法。方法的检出限为1.3 ng/ml,相对标准偏差为1.6％。本法简便快速且灵敏度高,可用于片剂及注射液中利血平含量的测定。